메뉴 건너뛰기

조회 수 2085 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 수정 삭제
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 수정 삭제
one) Regeneration gas: Lithium Battery Glove Box a combination of hydrogen and inert gas (hydrogen accounts for 5% -ten%)

2) Quantity: 40L gas cylinder 10Mpa

3) Regenerative gasoline strain: .05Mpa (the gas intake per 50 percent hour in the point out of .05Mpa is that the cylinder force drops by one.5Mpa. If it exceeds 1.5Mpa, the tension of the force regulator’s schedule will be decreased, if it is fewer than one.5Mpa Maximize the tension of the force regulator timetable)

4) Method: three hrs heating-three several hours heating and ventilation-3 hours vacuuming-1 hour pumping-ten several hours cooling

five) Measures:

① Hook up the regeneration fuel (check out the pipeline for leaks right after relationship: immediately after connecting, open the primary valve of the force minimizing valve to the maximum, open up the auxiliary meter to .1Mpa, change off the most important valve, wait around fifteen minutes, if the stress of the auxiliary meter continues to be at .one Mpa continues to be unchanged, indicating no air leakage

>②Set the tension of the auxiliary gauge of the force minimizing valve to .1Mpa (the stress in the course of ventilation is about .06-.08MPa

>③ Shut the cycle and analyz

/>④Turn on the vacuum pu

/>⑤ Start regenerat

/>⑥ The new program ends at 20h (clear right before cleaning, h2o and oxygen index <200p

r />6) Note: Do not cut off the power and gas during the regeneration process (especially the first 6 hours)! Some pressure reducing valves are not allowed, and the pressure needs to be adjusted appropriately to ensure continuous ventilation for 3 ho

r />7) Observation: whether the regeneration gas flowmeter shows about 20L / min, otherwise adjust the pressure of the pressure reducing valve.

Board Pagination Prev 1 ... 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 ... 4781 Next
/ 4781